FLUFF

FLUFF/2

Enquire Now

Specification

Overall Dimensions Of Chair-Seat Height - 43.5 Cm.Height - 78.5Cm.Width & Depth Of Chair As - Width 113.0Cm And Depth-70.0 Cm.Side Frame Assembly: The Side Frame Assembly Should Be Fitted To The Two Ends Of The Connecting Beam Assembly To Form The Leg-Cum-Armrest Assembly. It Should Be Made Of 0 3.81 ±0.03Cm. X 0.2 ±0.016Cm. Thick Cmx0.16Cnn And Black Powder Coated ( Dft 40-60 Microns ). The Ends Should Be Fitted With Abs Moulded End Caps.Tie Member: It Should Be The Connecting Beam Assy. Which Holds The Two Side Frames To Each Other. 2 Nos. Tie Members Should Be Used To Connect The Side Frames. The Tie-Member Should Be Of 0 3.81 ±0.03Cm. X 0.2 ±0.016Cm. Thick Cm X 0.16Cm And Black Powder Coated ( Dft 40-60 Microns ). The Seat/Back Assemblies Should Be Mounted On One Of The Tie-Member Which Has 5.0 ±0.1Cm X 5.0 ±0.1 Cm X 0.5 ±0.1Cm. Thk -- 5.5 ±0.1Cm Long Ms. Std. Angles Welded To Mount The Seat And Back.Seatrest Assembly:The Seat Rest Assembly Consshould Be Ts Of A Fabricated Inner-Frame Assembly Insitu-Moulded High Resilience (Hr) Polyurethane Foam Having Density = 45 +1- 2 Kg/M3 With Hardness Load 25 ± 2 Kgf For 25% Compression Of The Foam. The Complete Moulded Seat Rest Assembly Should Be Covered With A Replaceable Fabric Upholstery Cover*Seat Size: 52.0Cm. (W) X 50.0Cm. (D) X 6.0Cm. (T).Backrest Assembly:The Backrest Assembly Should Be Flexing Type And Consshould Be Ts Of A Fabricated Inner-Frame Assembly Insitu-Moulded With High Resilience (Hr) Polyurethane Foam Having Density = 45 +1- 2 Kg/M3 With Hardness Load 14 ± 2 Kgf For 25% Compression Of The Foam. The Complete Moulded Backrest Assembly Should Be Covered With A Replaceable Fabric Upholstery Cover. *Back Size: 52.0Cm. (W) X 59.0Cm. (H) X 6.0Cm. (T).Adj. Glides: The Adj. Glide Should Be Injection Moulded In Black Nylon & Fitted To The Front End Of Side Frame Assembly Along With Abs Moulded Adj. Glide Base To Take Cshould Be Or Unleveled Floor Surface.'